Being a network engineer in a dynamic environment can be sometimes tough. Especially when you face many interface reconfigurations in your daily routine. In this article, I want to share with you a tool, that can make your job easier,
Category: Vendor
Bridging different VLANs on the Nokia VSR
In the previous article, I’ve shown how to configure layer 2 connectivity between the Cisco switch and Nokia router. There are however situations when you will be forced to find a non-standard solution due to the circumstances. Imagine the following
Layer 2 connectivity configuration between Nokia VSR and Cisco IOSv
In this article, I want to shed some light on not so common configuration of the Nokia network equipment. You may encounter some situations, in which you would want to have pure layer 2 connectivity between two devices, that are
Nokia VSR Card/MDA provisioning – GNS3 example
Before you start to configure physical ports on Nokia network devices, you have to make sure, that cards and MDA’s are properly configured, either way, your configuration won’t work correctly. In this article, I’ll present the provisioning process on the
Nokia 7210 SAS-Sx operating system installation
There are several situations in which you would like to install an operating system on your network device. One of them is when you receive a brand new switch, without pre-installed OS. In this article, I’ll cover the installation of